If you are installing Windows XP, press F6 to install the STAT RAID driver and follow the instructions to complete the exact boot. After installing Windows, install Intel Application Accelerator RAID Edition 3.0. Use the Intel Application Accelerator RAID Edition to create a RAID volume from an existing hard drive.
Create a SATA RAID array using an Intel RAID configuration. Download the Intel Floppy Configuration Utility!| site and extract it to a floppy disk. If Windows XP is installed, press F6 to install the STAT RAID driver and follow the instructions to complete the boot process.
Introduction: How To Successfully Set Up Raid 1 On Windows XP
Can I set up RAID after installing Windows?
If your operating system is already installed, you can use RAID if some of the following conditions are met: Your podium has a RAID input/output controller (ICH) slot. If your system no longer has ICH RAID, you simply won’t be able to use RAID without installing an actual 3rd party RAID controller card. Your RAID controller is enabled.
I also use this guide for myself. Most of the time I forget things. I could go back and update this if I forgot a step.
There are different types of raids. Most of us implement them. This guide does indeed show you Help Fix Raid Installation Error In Windows XP – Prompt Chronicle to set up Raid #1 mirrored drives. More information can be found here http://en.wikipedia.org/wiki/RAID
What is RAID installation?
Best Answer: Redundant Array of Independent/Inexpensive Disks (RAID) is an amazing technology that allows you to store data across multiple hard drives. The goal of most RAIDs is to achieve number redundancy in order to reduce data loss and in many cases improve traceability.
What is a type 1 raid?
ARAID Setup 1 protects against data such as drive failure by simultaneously expanding data on two hard drives, a master drive and a secondary (or mirrored) drive. Since the second drive is an exact copy of the first drive, it does not provide usable storage capacity. RAID 1 does not improve disk performance.
I have wuploadork with different raids. I askedthen I work with all the servers of the various service providers that I work on.
I will be using this guide as a guide when using Windows XP. I will post more guides for Vista/Windows 7.
Does Windows XP support RAID?
Windows 2000 and Windows XP usually have the ability to programmatically create multiple disk RAID volumes. You must be logged in as an administrator to set up a full RAID array.
NOTE. Some motherboards have Raid built in. Access your personal BIOS and embedded ATA devices. If you have the raid mode option. To get to your manufacturer’s website, create drivers for the raid, saving them to a weak hard drive. Then you won’t have to pay money for a raid map.
Races to start with
*Try to make sure your computer case supports multiple drives and at least a PCI or PCI-E slot
* Floppy – If you have an external floppy, this should work. Windows Setup simply won’t install drivers from an avoidable disc
* RAID controller – If the mother does not have a developed raid. You must choose one that supports Raid 1. Make sure you have at least one PCI slot or if you have created a PCI-E slot that you can use. Be sure you are buying. Two
* Hard drive – I would recommend a Sata of the same model and size. Make sure you have two SATA cables.
Step 1. Purchase A Raid Controller Installation
If the Raid Controller is included, all you need is a floppy disk or CD. When was the disc released? Be sure to copy the CD files to the root of the weak drive.
Install the RAID controller like in a PCI slot or a PCI-E slot. Connect the ends of the SATA cable to two different SATA ports on the RAID controller. The other ends go to two hard drives to be installed.
If your motherboard has a raid. You need to go to your manufacturer’s website and copy the drivers for the raid. spend them less on a floppy disk. Be sure to read the manual with Raid enabled.
For all built-in raids, read the setup guide for those special drives.
Step 2 Disks
I will finally replace two Samsung 160GB Hard Boosts that have gone bad.
I will install two Seagate hard drives of 250 GB each.
If you’re wondering if I had backups, check the data. Yes, I only haveYour current data. I will reinstall Windows so you can take a look at the steps. It also showed errors under Windows. I didn’t want to get the picture and image on a new disk and agree to fix it.
Step 3. Hard Drive In The Enclosure
Install another hard drive in the appropriate slot. Connect the SATA cable to the RAID controller and the controller.
Take Into Account Time Step: In BIOS
Just turn on your computer and watch the screen where you should see a brand new SATA Raid command prompt. To display the menu for that specific raid map. You have to be careful which key to press because all my key combinations were Ctrl + A, others have a lot of keys to press.
Step 5: In The Exact Menu
Your raid must be in this custom raid controller menu
1. Disk Utilities makes sure you know both drives.
2. Carefully select the disks to create the array. Select double zero and last 01
3. Table properties. Board Type There are many raid options to choose from. In this guide, we useMirror Raid 1.
4. After you have chosen a real raid, you can create it. Sometimes gave you the opportunity to build immediately. But how can your family be sure the records are in order?
5. As you can already see this building. Disk mirroring can take several hours. However, you don’t have to wait for it. You can start hosting on Windows. Just leave the new configuration.
Step 6: Get The Drivers
Where is RAID setup?
Go to Configuration > SATA Drives, set chipset SATA mode to RAID. Go to “Advanced” > “Disk Configuration”, set “Configure SATA” to “RAID”. Go to Advanced > Disk Configuration, set Disk Mode to Advanced and hence set the RAID option to”Enabled”.
Now prepare your own Windows CD and floppy.
Insert the CD (If your desktop doesn’t have the option to choose exactly what you want to boot first, you’ll need to go to some BIOS and boot options and tell it to boot from CD, do that first).
Once Windows development has started, boot from the CD and insert the floppy.
1. Look at the bottom of the screen when you get the blue window setting. Find F6 and press several times – mount disks.
2. If you hold down F6. It will read a weak disk and if you have the correct drivers from someone it will give you the path toselect the driver you want to use. Press Enter.
3. After downloading the software. You will be presented with an option. If you are sure you have the correct drivers. Press S.
Step 7. Format The Drive
1. Welcome to help you customize. Press Enter to display the main configuration window.
2. You start collecting the score.
3. After you have split. You are now ready to set up Windows XP on the selected item.
Does Windows XP support RAID?
Windows 2000 and Windows XP may have the ability to create RAID slices across multiple hard drives on demand. You must be a system administrator to set up a RAID array.
4. Maybe it’s up to you, if you think the drives are good, I would choose a quick format.
5. The formatting of the hard disk will begin.
Step 8. Last Step For Installing Windows
1. This is the last step for Windows. You still need to be in front of the computer. May ask you to name an electronic computer. He can learn about pilots that you just say “yes” to pilots in certain raids.
2. Download Windows XP.
3. As you can see, Windows XP is already installed. You realize you only see one ride. The other drive is mirrored.
Well, all this with raids
Before you stopFor any program or update. However, I would go to the raid controller tool and check the building status, but didn’t turn it on.
Be The First To Share
I also use a special guide for myself. Most of the time I forget things. I might go back and update this if I miss a step.
There are really different types of raids. Many of us use them. These facts only show how to set up RAID 1 mirrored drives. More help and tips can be found here http://en.wikipedia.org/wiki/RAID
What is raid 1?
A RAID 1 slice simultaneously protects data from drive failure by writing data to two hard drives, the main hard drive, and a spare (or mirrored) hard drive. Because the second disk contains an extreme copy of the first, it has no usable capacity. RAID 1 does not improve disk performance.
Can I set up RAID after installing Windows?
If your valuable operating system is already installed, you can use RAID under the following conditions: Your system has a RAID I/O Controller Core (ICH). If your system does not need ICH RAID, you may not need RAID without installing a third party RAID controller card. Your RAID controller is considered enabled.
How do I enable RAID in BIOS?
Press F2 during boot to enter BIOS settings.
To enable RAID, use one of the following forms depending on the card model. Go to Configuration > SATA Drives, bind chipset SATA mode to RAID.
Press F10 to save and exit.